| ID | Phase | Error Message | Reason of Error | Treatment of Error |
|---|---|---|---|---|
| E044 | Communication with DNG | There was an error while trying to retrieve required data from DNG. | There was an error while trying to retrieve required data from DNG. | Synchronize the DNG component by clicking the Synchronise Modules button and refresh the data displayed in the ReqIF Manager by pressing the refresh button of your browser. |
| E400 | Communication with DNG | The loader interface could not be initialized. | Error in communication with DNG. | Synchronize the DNG component by clicking the Synchronise Modules button and start Job again. |
| E410 | Communication with DNG | The Folder in DNG was not found for URI "<used_URI>". | The URI you provided could not resolved to a Folder in DNG. | Check your URI used. Is it a Folder in DNG? |
| E411 | Communication with DNG | The Folder in DNG was not found in the import Change Set. | The URI you provided could not resolved to a Folder in DNG in your import Change Set. | Check your URI used. Is it a Folder in DNG in your import Change Set? |
| E412 | Communication with DNG | The Folder in DNG "<folder_name>" you selected is invalid. | The selected Folder in DNG could not be found in database. | Synchronize the DNG component by clicking the Synchronise Modules button. Afterwards, refresh your data by clicking the Refresh button of your browser and try again. |
| E413 | Communication with DNG | The Folder in DNG needs to be in stream context! Changeset context is not allowed. | The Stream in DNG you provided is in Changeset context. Only stream context is allowed. | Get URI from correct stream context. |
| E420 | Communication with DNG | The Component in DNG was not found for the URI "<used_URI>". | The URI you provided could not resolved to a Component in DNG. | Copy the following URI, does the Component in DNG exist?Component in DNG |
| E431 | Communication with DNG | The Stream in DNG you selected is invalid. | The selected Stream in DNG could not be found or was not in current component. | Synchronize the DNG component by clicking the Synchronise Modules button and refresh the data displayed in the ReqIF Manager by pressing the refresh button of your browser. |
| E433 | Communication with DNG | The Folder in DNG needs to be in stream context! Global Configuration context is not allowed. | The Stream in DNG you provided is in Global Configuration context. Only stream context is allowed. | Get URI from correct stream context. |
| E434 | Communication with DNG | The Folder in DNG needs to be in stream context! Baseline context is not allowed. | The Stream in DNG you provided is in Baseline context. Only stream context is allowed. | Get URI from correct stream context. |
| E440 | Communication with DNG | The Module in DNG was not found for the URI "<used_URI>". | The URI you provided could not resolved to a Module in DNG. | Check your URI. Is it a Module in DNG? |
| E451 | Communication with DNG | The View in DNG you selected is invalid. | The selected View in DNG could not be found or was not in current component. | Synchronize the DNG component by clicking the Synchronise Modules button and refresh the data displayed in the ReqIF Manager by pressing the refresh button of your browser. |
| E460 | Communication with DNG | The URI for "<Spec-Type>" was not found. | The URI could not retrieved from DNG. | Synchronize the DNG component by clicking the Synchronise Modules button. Afterwards, refresh your data by clicking the Refresh button of your browser and try again. |
| E461 | Communication with DNG | The ReqIF ID for "<Spec-Type>" was not found. | The ReqIF ID could not retrieved from DNG. | Synchronize the DNG component by clicking the Synchronise Modules button. Afterwards, refresh your data by clicking the Refresh button of your browser and try again. |
| E470 | Communication with DNG | There was an error while trying to retrieve required data from DNG. Please make sure you have an active session and the data you require are available on the DNG server. | There was an error while trying to retrieve required data from DNG. | Synchronize the DNG component by clicking the Synchronise Modules button and refresh the data displayed in the ReqIF Manager by pressing the refresh button of your browser. |
| E480 | Export HIS Preprocessing | Error delivering Change Set because there are changes for artifacts that are locked. | There are user-locked artifacts in the stream into which the change set is to be delivered. | Wait/ask until users finish their work on the corresponding artifacts. |
| E334 | Export | Error on tracking export progress on server. | Error in communication with DNG. | Start Job again by clicking the Restart button in the headline of the Job. |
| E335 | Export | Error starting ReqIF Export. | Error in communication with DNG. | Start Job again by clicking the Restart button in the headline of the Job. |
| E340 | Export | No download package found on server. | DNG internal error. | Try to export the ReqIF Definition manually and try to download the package. |
| E341 | Export | Export package could not be downloaded from DNG. | Error in communication with DNG. | Try to export the ReqIF Definition manually and try to download the package. |
| E342 | Export | DNG export log could not be downloaded from DNG. | Error in communication with DNG. | Try to export the ReqIF Definition manually and try to download the package. |
| E344 | Export | Error while creating download package for job. | An error occurred while building the download package. | Check the Job Log for further information. Retry the export. |
| E345 | Export | Error while creating export documentation. | An error occurred while creating the export documentation. | Check the Job Log for further information. Retry the export. |
| E346 | Export | Error encrypting the export package. | For some reason the export package could not encrypted. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the export again. If the problem persists, contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E347 | Export | Error when closing the job package. | For some reason the export package could not closed. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the export again. If the problem persists, contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E350 | Export | Could not find ReqIF file. | ReqIF file could not be read or found in downloaded export package. | Check the Job Log for further information. Retry the export. |
| E500 | Export / Import | The Job was canceled by user "<username>". | The Job was canceled by the named user. | Start Job again by clicking the Restart button in the headline of the Job. |
| E501 | Export / Import | The Job ended unexpectedly. | The process of the job has ended without finishing the job | Start Job again by clicking the Restart button in the headline of the Job. |
| E503 | Export / Import | Could not resolve ProcessorSet class "<class_name>", incorrect configuration. | Incorrect configuration of processor set. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the process again. Then contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E504 | Export / Import | Unknown job type. | Invalid job state in database. | Start Job again by clicking the Restart button in the headline of the Job. |
| E502 | Export / Import Preprocessing | Could not initialize Module for Job. | Error in communication with DNG. | Start Job again by clicking the Restart button in the headline of the Job.. |
| E510 | Export / Import Preprocessing | Missing Spec-Object-Type for object with identifier "<object_identifier>". | During mapping transformation the object type could not resolved. | Synchronize the DNG component by clicking the Synchronise Modules button and check the type mapping to make sure there are no conflicts. |
| E511 | Export / Import Preprocessing | Spec-Object with identifier "<object_identifier>"> was not found in the transformed file. | During mapping transformation the Spec-Object was not found in transformed file. | Synchronize the DNG component by clicking the Synchronise Modules button and check the type mapping to make sure there are no conflicts. |
| E320 | Export Postprocessing | Could not parse exported ReqIF file for module "<module_name>": <exception> Recommendation for action:In order to check the ReqIF file, download the ReqIF file in DNG from ReqIF definition "<reqif_definition_name>". | Could not parse exported ReqIF file. | Download the ReqIF file from DNG and check the ReqIF file manually. |
| E321 | Export Postprocessing | Could not open exported ReqIF package for module "<module_name>". | Could not open exported ReqIF package. | Start Job again by clicking the Restart button in the headline of the Job. |
| E360 | Export Postprocessing | Could not resolve imported specification for mapping. | Error in processing the mapping information. | Perform the mapping again and re-import data. |
| E361 | Export Postprocessing | Source Specification not found. | The ReqIF identifier of the specification was not found, probably it has changed. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the process again. Then contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E362 | Export Postprocessing | Target Specification not found. | The ReqIF identifier of the specification was not found, probably it has changed. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the process again. Then contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E363 | Export Postprocessing | Could not resolve mapped Spec-Object-Type for "<mapped_type>" in object "<object_identifier>". | During mapping transformation the mapping for the type could not be resolved. | Synchronize the DNG component by clicking the Synchronise Modules button and check the type mapping to make sure there are no conflicts. Retry export. |
| E366 | Export Postprocessing | Missing AttributeDefinition for attribute "<attribute_name>" in target object "<object_identifier>". | Attribute definition could not be found during mapping. | Synchronize the DNG component by clicking the Synchronize Modules button and reload data in mapping from import. Retry export. |
| E368 | Export Postprocessing | Could not resolve Spec-Relation-Type (Link Type) for Spec-Relation (Link) "<spec_relation_identifier>". | Link Type could not be found during mapping in transformed file. | Synchronize the DNG component by clicking the Synchronize Modules button and reload data in mapping from import. Retry export. |
| E370 | Export Postprocessing | Missing Spec-Relation-Type (Link Type) for Spec-Relation (Link) "<spec_relation_identifier>" in exported module package. | Link Type could not be found during mapping in downloaded file. | Retry export. Run ReqIF validator to check file. |
| W364 | Export Postprocessing | Found "<number>" possible mapped Spec-Object-Types for "<spec_object_type>" using "<used_dpec_object_type>". | During mapping transformation the mapping for the type could was resolved to multiple types, using one of them. | Warning, check if the correct type is used during mapping. |
| W365 | Export Postprocessing | Transformed from "<base_type>" to "<mapped_base_type>", Information may be lost! | During mapping transformation the mapping for the type was mapped from XHTML to not XHTML, information could be lost. | Warning, in the Import Change Set, check if any relevant information has been lost in the attribute. |
| W367 | Export Postprocessing | Multiple Spec-Relation-Types (Link Types) are mapped for Spec-Relation "<spec_relation_identifier>", using Spec-Relation-Type "<link_type>". | During mapping transformation the mapping for the Link Type was resolved to multiple Link Types, using one of them. | Warning, check if the correct Link Type is used during mapping. |
| W369 | Export Postprocessing | No mapping found for Spec-Relation (Link) "<spec_relation_identifier>", it will be ignored. | During mapping transformation no mapping for the link was found | Warning, no link belonging to the Spec-Relation have been exported. Check if this is intentional. |
| W371 | Export Postprocessing | Found "<number_of_enum_values>" mapped enum values for "<enum_value>", used "<target_enum_value>" for attribute "<attribute_name>" in object "<object_identifier>". | During mapping transformation the mapping for the Enum Value was resolved to multiple Enum Values, using one of them. | Warning, check if the correct Enum Value is used during mapping. |
| W372 | Export Postprocessing | Unmapped enum value for "<enum_value>" in attribute "<attribute_name>" in object "<object_identifier>". | During mapping transformation no mapping for the Enum Value was found in downloaded file. | Warning, Enum Value was not exported. |
| W373 | Export Postprocessing | Found no enum value for attribute "<attribute_in_file>" from attribute "<mapped_dng_attribute>" in object "<object_identifier>". | During mapping transformation the Enum Value was not found in transformed file. | Warning, Enum Value was not exported. |
| E331 | Export Preprocessing | Error creating export Change Set on DNG server. | Change Set in DNG could not be created. Maybe you have insufficient access permissions. | Try to create a Change Set manually. If not possible check your permissions and role in DNG. |
| E332 | Export Preprocessing | Error delivering export Change Set on DNG server. | Change Set in DNG could not be delivered. Maybe you have insufficient access permissions. | Try to deliver a Change Set manually. If not possible check your permissions and role in DNG. |
| E333 | Export Preprocessing | Error creating export ReqIF Definition on DNG server. | ReqIF Definition in DNG could not be created. Maybe you have insufficient access permissions. | Try to create a ReqIF Definition manually. If not possible check your permissions and role in DNG. |
| E010 | Global | Operation not successful: <error_message> | Something happened that was not expected. | Search error log for further information. Contact Support product-support@requisis.com with a description of how to reproduce that error. |
| E021 | Global | Could not get ReqIF file from package. | No ReqIF file corresponding to your specification could be found. | Upload a .reqifz file. |
| E022 | Global | Could not open package. | For some reason the package with the ReqIF file could not be opened. | Try again. |
| E023 | Global | Error encrypting ReqIF package. | For some reason the package with the ReqIF file could not encrypted. | Try again. |
| E030 | Global | The Import Session you are trying to get is no longer active. | The Import Session was not found in database. Maybe it was closed. | Refresh your data by clicking the Refresh button of your browser and try again. |
| E031 | Global | The Export Session you are trying to get is no longer active. | The Export Session was not found in database. Maybe it was closed. | Refresh your data by clicking the Refresh button of your browser and try again. |
| E040 | Global | Directory "<directory_path>" could not created. | Directory could not created. | Refresh your data by clicking the Refresh button of your browser and try again. |
| E041 | Global | File could not be moved to upload folder. | Processing of the uploaded file failed. | Refresh your data by clicking the Refresh button of your browser and try again. |
| E042 | Global | Referenced module not found. | When starting the import job, the specified module can no longer be found. | Synchronize the DNG component by clicking the Synchronise Modules button. Afterwards, refresh your data by clicking the Refresh button of your browser and try again. |
| E043 | Global | Empty file content. | In the uploaded package there is an empty ReqIF file. | Remove empty file from ReqIF package and re-upload package. |
| E045 | Global | Missing name for Predefined Profile. | The Predefined Profile has no name assigned. | Assign a name for the Predefined Profile. |
| E046 | Global | Missing YAML code for Predefined Profile. | The Predefined Profile has no YAML. | Add YAML code for the Predefined Profile. |
| E248 | Import | Incomplete import parameters in import package. | Some required parameters for creating the ReqIF definition were not found in the import package. | Please upload file again. |
| E263 | Import | Could not resolve target stream. | Error in communication with DNG. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the import again. If the problem persists, contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E280 | Import | Errors occurred during Import. Show log for further information. | This error can occur for various reasons. | Show log for further information. |
| E281 | Import | Import for module "<Module_Name>" could not be started. | Errors occurred trying to start import for this module. | Open the Module Log to get a detailed error message. |
| E282 | Import | Analyze package content in DNG failed. | The uploaded package could not be analyzed by DNG. | Try to import package with DNG internal function. |
| E283 | Import | ReqIF package for module "<Module_Name>" could not be uploaded. | The uploaded package could not be uploaded to DNG. | Try to import package with DNG internal function. |
| E284 | Import | Data model for module "<Module_Name>" could not be created. | Import definition for the module cannot be created. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the import again. If the problem persists, contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E285 | Import | Error on tracking import progress on server. | Error in communication with DNG. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the import again. If the problem persists, contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E286 | Import | Could not retrieve import result from DNG. | DNG does not provide an import result. | Try to import package with DNG internal function. |
| E287 | Import | Import for module "<Module_Name>" unsuccessful! | This error can have different reasons. | Show Module Log for further information. |
| E288 | Import | Cannot load ReqIF Factory for module "<Module_Name>". | Error in communication with DNG. | Synchronize the DNG component by clicking the Synchronise Modules button and start import again. |
| E289 | Import | Cannot load imported module: "<Module_Name>". | Retrieving the module URI failed. | Check if the module is still exists and check the Module Log. |
| E290 | Import | Module with ReqIF identifier "<Spec-Identifier>" not found after import to DNG. | Error occurred during import to DNG. | Check the Module Log and the DNG log for errors. |
| E291 | Import | Could not resolve Stream of Change Set. | Error while creating the automatically generated Change Set. | Check if you can create a Change Set in the desired Stream of the corresponding DNG component. |
| E293 | Import | The Change Set or Stream used for "<Jobtype>" no longer exists or is not available. | The Change Set or Stream used for export / import no longer exists or is not available. | Possible reasons are: Change Set is delivered. Change Set is discarded. Stream is archived. Please Synchronize Modules and add them to export/import again. If the Change Set is no longer available, please abort the import session and start a new import session to create a new Import Change Set. |
| E230 | Import Preprocessing | Specification with Identifier "<specification_identifier>" not found in ReqIF Package. | The Specification with the given Identifier was not found in import file. | Send this file to product-support@requisis.com and and provide the following data and information: Reqif Set, Job Number and Error Message |
| E231 | Import Preprocessing | Errors occurred transforming reqif file. Show Job Module log for further information. | Errors occurred transforming reqif file. | View Module Log for more information. |
| E235 | Import Preprocessing | Could not resolve Spec-Object-Type for Spec-Object "<object_identifier>". | During mapping transformation the type for the object could not be resolved. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E236 | Import Preprocessing | No mapping found for attribute "<attribute_name>" in Spec-Object "<object_identifier>". | During mapping transformation no mapping was found for the attribute. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E237 | Import Preprocessing | Conflicting Datatypes "<base_type>" and "<mapped_base_type>" for attribute "<attribute_name>" in Spec-Object "<object_identifier>". | During mapping transformation there was a conflict in base types. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E238 | Import Preprocessing | Can not write attribute value, some unexpected data occurred: "<unexpected_data>". | During mapping transformation there was some unexpected data during attribute value creation. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E239 | Import Preprocessing | Could not create Attribute "<attribute_identifier>" with type "<attribute_type>" and value "<attribute_value>". | During mapping transformation there was some unexpected error during attribute value creation. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E240 | Import Preprocessing | No identifier found for "<element_name>" with uri "<uri>" | During mapping transformation ReqIF Identifier could not resolved. | Please export at least one artifact with the mentioned element and repeat the import. |
| E243 | Import Preprocessing | Datatype "<type>" for attribute "<attribute_name>" not found. | The datatype was not found in transformed import file. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E244 | Import Preprocessing | Could not resolve module type. | During mapping transformation the module type could not resolved. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E245 | Import Preprocessing | Could not resolve new Spec-Object-Type for Spec-Object with ID "<object_identifier>" and Spec-Object-Type-ID "<SpecObjectType_ID>". | During mapping transformation the new object type could not resolved. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| E246 | Import Preprocessing | Could not resolve Spec-Object-Type for object with identifier "<object_identifier>". | During mapping transformation the object type could not resolved. | Synchronize the DNG component by clicking the Synchronize Modules button and Reload Data in mapping. Retry import. |
| W242 | Import Preprocessing | No identifier found for SPEC-RELATION-TYPE (LinkType) "<LinkType>" with uri "<uri>". Please check link constraints for this type to fix this warning. | During mapping transformation the identifier for the link type could not resolved. | Please export at least one link of the mentioned type and repeat the import. |
| E260 | OSLC Import | Some errors occurred during OSLC Import. Show Module Log for further information. | Some errors occurred during OSLC Import. | Show Module Log for further information. |
| E261 | OSLC Import | Could not resolve OSLC Importer. | Error in communication with DNG. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the import again. If the problem persists, contact support atproduct-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E262 | OSLC Import | Could not resolve target for OSLC Importer. | Error in communication with DNG. | Create a debug log by checking the corresponding checkbox at the bottom of the ReqIF set and trigger the import again. If the problem persists, contact support atproduct-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| E264 | OSLC Import | No Import Specification found. | No Specification Identifier found or no match with stored Specification Identifier. | Please upload file again. |
| E269 | OSLC Import | The Spec-Object-Type with Spec-Object-Type-Identifier "<Spec-Object-Type-Identifier>" not found for Artifact "<Artifact_Identifier>". | The Spec-Object-Type was changed or deleted by one of the exchange partners. | Warning, check the mentioned artifact in DNG and in the import package. |
| E271 | OSLC Import | Error updating artifact "<Artifact_Identifier>": <Error_Message> | An error occurred while updating the named artifact. | Check the error message and look into the module log. |
| W265 | OSLC Import | Attribute "<attribute_name>" not found in ReqIF file. | A writable attribute was not found in the import package. | Warning, check why the attribute is not included in the import package. |
| W266 | OSLC Import | The Artifact "<artifact_identifier>" occurs multiple times. | One Artifact is multiple times in the file. | Warning, check why the artifacts are multiple and whether any data has been lost. |
| W267 | OSLC Import | For artifact "<Artifact_Identifier>" no ReqIF identifier could be found in DNG mapping data. | Artifact could not be found in the module structure. | Warning, retry import. If the problem persists, contact support at product-support@requisis.com and provide the following data and information: Communication Log, Job Number and Error Message. |
| W268 | OSLC Import | Artifact "<Artifact_Identifier>" with Spec-Object-Identifier "<Spec-Object_Identifier>" is not contained in import file. | The mentioned artifact that is currently present in the DNG view was not exported during the last export and is therefore not present in the ReqIF file. | Warning, check the mentioned artifact. |
| W270 | OSLC Import | Attribute "<Attribute_Name_In_DNG>" not found in DNG for Artifact "<Artifact_Identifier>". The value "<Attribute_Value>" for attribute "<Attribute_Name_In_File>" cannot set for this artifact in DNG. | In the import file, there is an attribute for the named artifact that does not exist in DNG. | Warning, check the mentioned artifact and attribute in DNG and in the import package. |
| E100 | ReqIF Set Management | The ReqIF Set you are looking for was not found. | The ReqIF Set was not found in database. Maybe it was deleted. | Choose another ReqIF Set. |
| E110 | ReqIF Set Management | The Partner you are looking for was not found. | The Partner was not found in database. Maybe it was deleted. | Choose another Partner. |
| E120 | ReqIF Set Management | The Module Configuration you are looking for was not found. | The Module Configuration was not found in database. Maybe it was deleted. | Choose another Module Configuration. |
| E134 | ReqIF Set Management | Import Session already started with id "<import_session_id>". | The Import Session was already started. | Refresh your data by clicking the Refresh button of your browser and try again. |
| E135 | ReqIF Set Management | Export Session already started with id "<import_session_id>". | The Export Session was already started. | Refresh your data by clicking the Refresh button of your browser and try again. |
| E136 | ReqIF Set Management | Unable to close Export Session. There are export jobs being executed. Please wait for all export jobs related to this session to finish. | There are export jobs being executed related to this Export Session. | Please wait for all export jobs related to this Export Session to finish, before closing the Export Session. |
| E150 | ReqIF Set Management | The Job you are looking for was not found. | The Job was not found in database. Maybe it was deleted. | Choose another Job. |
| E160 | ReqIF Set Management | The Job Module you are looking for was not found. | The Job Module was not found in database. Maybe it was deleted. | Please reload your data by clicking the Synchronise Modules button and try again. |
| E161 | ReqIF Set Management | You have no access to this Job Module. | The Job Module was found in database but you have no access. | Contact ReqIF Set owner to get the ReqIF Set shared. |
| E170 | ReqIF Set Management | File not found. | The File you are looking for was not found. Maybe it was deleted? | Refresh your data by clicking the Refresh button of your browser and try again. |
| E171 | ReqIF Set Management | No mapped Import Package found. | The mapped Import Package you are looking for was not found. Maybe it was deleted? | Refresh your data by clicking the Refresh button of your browser and upload your file(s) again. |
| E172 | ReqIF Set Management | Your upload file size exceeded the maximum upload file size of (150M) | The uploaded file size was larger than the allowed maximum upload file size. | Reduce the file size of your upload and upload it again. |
| E173 | ReqIF Set Management | Your upload file was not transferred correctly. | The uploaded file size was 0. Maybe you tried to drag and drop a file from a zip package. | Unzip a package if you want to add packages from it with drag and drop. Or use upload button. |
| E174 | ReqIF Set Management | Could not copy import file to job folder | Processing of the uploaded file failed. | Refresh your data by clicking the Refresh button of your browser and start a new Job. |
| E175 | ReqIF Set Management | Could not find import file for module "<module_name>". Please upload it again. | Uploaded import file not found. | Refresh your data by clicking the Refresh button of your browser and upload your file again. Start a new Job. |
| E176 | ReqIF Set Management | The uploaded ReqIF File does not match any previously exchanged ReqIF-Files. In Role "customer" only module that have previously been exported can be reimported. | In Role "customer" only previous exported modules can be reimported. If you want to import new ReqIF-Package you need a ReqIF Set in role "supplier". | If you want to import new ReqIF-Package you need a ReqIF Set in role "supplier". Otherwise check the ReqIF Identifier of the Specification in your ReqIF file manually. |
| E177 | ReqIF Set Management | Could not resolve mapping for import file. | No ReqIF specification found in the uploaded import package. | Upload a ReqIF file with a specification. |
| E178 | ReqIF Set Management | Could not create upload package. | Processing of the uploaded file failed. | Create a .reqifz package from your .reqif file by zipping the .reqif file and changing the file extension to .reqifz. |
| E193 | ReqIF Set Management | The resource in DNG needs to be in local context. Global Configuration context is not allowed! | A resource uri with Global Configuration context was provided! | Please try to get the resource uri from local context. |
| W101 | ReqIF Set Management | You have no access to this ReqIF Set. | The ReqIF Set was found in database but you have no access. | Contact ReqIF Set owner to get the ReqIF Set shared. |
| W102 | ReqIF Set Management | A ReqIF Set with the name "<reqif_set_name>" already exists. | Duplicate ReqIF Set name for ReqIF Set. | Choose another name. |
| W103 | ReqIF Set Management | The name of the ReqIF Set cannot be longer than 255 characters. | The name of the ReqIF Set is too long. | Choose an shorter name. |
| W104 | ReqIF Set Management | In Supplier Role only 1 Partner per ReqIF Set is allowed. | You have tried to save more than 1 Partner in your ReqIF Set. | Add your Partner to a new ReqIF Set. |
| W105 | ReqIF Set Management | The name of the ReqIF Set must be at least 3 characters long. | The name of the ReqIF Set is too short. | Choose an longer name. |
| W106 | ReqIF Set Management | The user "<user_name>" is not allowed to be the owner of of the ReqIF Set. | The user's email domain is listed in the rm.reqifset.owner.domain.backlist parameter and therefore the user is not allowed as a ReqIF Set owner. | Choose another user as the ReqIF Set owner. |
| W111 | ReqIF Set Management | You have no access to this Partner. | The Partner was found in database but you have no access. | Contact ReqIF Set owner to get the ReqIF Set shared. |
| W112 | ReqIF Set Management | A Partner with the name "<ReqIF_Set_Name>" already exists. | Duplicate Partner name for ReqIF Set | Choose another name. |
| W113 | ReqIF Set Management | The name of the Partner cannot be longer than 255 characters. | The name of the Partner is too long. | Choose an shorter name. |
| W114 | ReqIF Set Management | The selected Predefined Mapping was not found. | The selected Predefined Mapping was not found. | Refresh your data by clicking the Refresh button of your browser and try again. |
| W121 | ReqIF Set Management | You have no access to this Module Configuration. | The Module Configuration was found in database but you have no access. | Contact ReqIF Set owner to get the ReqIF Set shared. |
| W125 | ReqIF Set Management | Data missing for save Module Configuration Stream not found. | The Module Configuration could not saved because some data are missing. | Please reload your data by clicking the Synchronise Modules button and try again. |
| W151 | ReqIF Set Management | You have no access to this Job. | The Job was found in database but you have no access. | Contact ReqIF Set owner to get the ReqIF Set shared. |
| W180 | ReqIF Set Management | You have no access to Administration area. | You have no access to page you trying to load. | Get Access rights to Administration area. |
| W181 | ReqIF Set Management | Required parameter "<parameter_name>" is incorrect. | The mentioned parameter is required, but was missing or empty. | Refresh your data by clicking the Refresh button of your browser and try again. |
| W190 | ReqIF Set Management | No module URI provided. | An empty module URI was provided. | You have to insert a module URI to add module. |
| W191 | ReqIF Set Management | No Baseline URI found. | An empty baseline URI was provided. | Please reload your data by clicking the Synchronise Modules button and try again. |
| W192 | ReqIF Set Management | No valid Module Configurations found. | An empty set of Module Configurations was provided. | Please reload your data by clicking the Synchronise Modules button and try again. |
| W195 | ReqIF Set Management | The User you are looking for was not found. | The User was not found in database. Maybe it was deleted. | Choose another User. |
Overview
Content Tools